Turn Signals / Indicators Mounted Under Seat

Finally mounted the turn indicators under the seat,it looks totally cool.

Side License Plate

Here is the pic of side license plate mounted on the bike.i liked the way it looks when mounted to the top of the rear shock,instead of the usual mounting at the bottom end.

Bobber Style Tail & Indicator Lighting

I have got my bobber style side number plate, mini bates tail lamp and mini led laser indicators.it took us quite a while to figure out the wiring , blew a fuse.

Lucky i got some guidance from the xlforums,else it would take us a lot more time.

Rear Lights Main Harness Connector

You will need to unplug the main harness from the rear module and then will need to figure out which cable does what. after that we soldered the wires according to the colours and used electrical tape to keep them clean and uncluttered.

Rear Tail/Indicator , License plate light connectors

these are the individual connectors to the indicator lights and the rear number plate light.you could also remove the existing connectors from the tail lights and use them to plug into these modules.but I prefer hard-wiring them.

2nd Service Done

Finally touched the 5000 mark on my speedo.got the 2nd service done on the bike,with few mods to it.

 This time i put in the screaming eagle synth oil,new oil filter , cleaned the spark plugs,air filter ,battery terminals,checked the brake pads,clutch and other stuff.